Front-loaders hide their drain filter behind a small access panel at the bottom of the cabinet, and a surprising number of "broken" washers are simply a blocked one. A good technician will tell you that rather than sell you a part. We connect homeowners in Glendale — about 258,143 people, in Maricopa County — with local pros who work that way.
Technicians in our network cover Glendale itself and the surrounding communities, including Phoenix (6.3 miles), Tempe (17.9 miles), Peoria (18.8 miles), Scottsdale (21.6 miles), Chandler (26.1 miles) and Mesa (28.8 miles). If your town is not named here, call anyway and tell us where you are — coverage usually reaches further than the list.
Arizona's water is among the hardest in the country, so front-loaders in Glendale see mineral deposit on the heating element and inlet valve, slower fills, and a chalky film in the door boot's folds. Dry desert air makes gasket mold less aggressive than in the Southeast, but a garage laundry room in summer is hard on rubber hoses and seals.
A front-loader's drum hangs on springs and shock absorbers that damp the movement of an unbalanced load. As those shocks wear, the drum starts to swing further, and the machine bangs, vibrates hard, or walks across the laundry-room floor on a fast spin. It is worth ruling out the simple causes first: an unlevel machine, feet that have not been adjusted, or transit bolts never removed after delivery. If the machine is level and still moving, the shocks have most likely gone, and they are usually replaced as a set. Left alone, a wildly vibrating drum accelerates wear on the bearing behind it, which is a far more expensive repair. Technicians in Glendale see this one constantly.
LG front-load washers use a direct-drive motor with no belt, which removes one common failure point and adds others. LE, UE and OE codes — motor, unbalanced load and drain respectively — are the ones owners see most. LG parts are generally available, and technicians in our network work on these machines as a matter of course.
Tell us what the machine is doing, the brand, and roughly where you are.
A local technician gives you a flat price before any work starts.
Depends on your local partner's schedule — we'll give you a straight answer.
They're an independent business. If it's not right, we'll send another partner at no extra cost.
Tell us the brand and what it is doing. Free quote, no obligation.
Ten to fourteen years is typical, though it varies a good deal with usage and maintenance. Cleaning the drain pump filter regularly, wiping the door boot dry, leaving the door open between loads and using the right amount of HE detergent all push a machine toward the upper end of that range.
Yes — the technicians in our network work on Whirlpool, Samsung, LG, GE, Maytag, Bosch, Electrolux, Frigidaire, Kenmore and Speed Queen front-loaders, among others. We are an independent referral network and are not factory-authorized by any manufacturer; all brand names belong to their respective owners.
Every technician in our network is checked for active licensing and insurance before taking a referral, and they are re-checked on a rolling basis. They are independent local businesses rather than our employees — we connect you, they do the work, and you pay them directly.