Front-loaders hide their drain filter behind a small access panel at the bottom of the cabinet, and a surprising number of "broken" washers are simply a blocked one. A good technician will tell you that rather than sell you a part. We connect homeowners in New Orleans — about 362,701 people, in Orleans Parish — with local pros who work that way.
Technicians in our network cover New Orleans itself and the surrounding communities, including Gretna (12.1 miles), Westwego (16.2 miles), Harahan (18.0 miles), Slidell (18.6 miles), Kenner (19.4 miles) and Mandeville (24.5 miles). If your town is not named here, call anyway and tell us where you are — coverage usually reaches further than the list.
Louisiana's soft water means scale is rarely the issue in New Orleans — humidity is, and there's as much of it here as anywhere. A front-loader's door boot holds water in its fold after every cycle, and in this climate it effectively never dries, so mold and a musty smell dominate the complaints. Storm-season power surges are a separate risk to the control board.
The rubber door boot on a front-loader is a deep fold designed to seal the drum, and it holds a small amount of water after every single cycle. Add detergent residue and the fabric softener film that builds up behind it, and you have exactly the conditions mold needs. This is the single most common front-load complaint technicians see, in New Orleans and everywhere else. Sometimes a deep clean of the boot, dispenser drawer and drain filter clears it. When the mold has worked into the rubber itself, or the boot is perished, the seal needs replacing — and that is a job worth having done properly, because a badly fitted boot leaks.
LG front-load washers use a direct-drive motor with no belt, which removes one common failure point and adds others. LE, UE and OE codes — motor, unbalanced load and drain respectively — are the ones owners see most. LG parts are generally available, and technicians in our network work on these machines as a matter of course.
Tell us what the machine is doing, the brand, and roughly where you are.
A local technician gives you a flat price before any work starts.
Depends on your local partner's schedule — we'll give you a straight answer.
They're an independent business. If it's not right, we'll send another partner at no extra cost.
A flat price before any work starts. You pay the local pro directly.
Door boot seal work, by a clear margin — either cleaning out mold or replacing a seal that has torn. After that come drain pump blockages, worn shock absorbers, and drum bearings. Those four cover the large majority of the calls our network routes.
Start with the drain pump filter, behind the small panel at the bottom front of the machine. Coins, buttons and lint collect there and block it, and most owners have never opened it. If the filter is clear, the next suspects are a kinked or blocked drain hose and the pump itself — and that is the point at which it is worth calling a technician.
Almost always the door boot seal. That rubber fold holds water after every cycle, and detergent and fabric-softener residue build up behind it until mold takes hold. Cleaning the boot, the dispenser drawer and the drain pump filter clears most cases. Leaving the door ajar between loads and switching to HE detergent in the right dose prevents it coming back.